Viton 75 o ring

Viton 75 o ring DEFAULT
A&#; X98 Aflas Black 80 $ -

0 In Stock
Need More?

AX 3X Aflas Black 80 $ -

0 In Stock
Need More?

AX X84 Aflas Black 80 $ -

0 In Stock
Need More?

EX X55 EPDM Black 70 $ -

0 In Stock
Need More?

EX X25 EPDM Black 75 $ -

0 In Stock
Need More?

EX X57 EPDM Black 75 $ -

0 In Stock
Need More?

EX 5X38 EPDM Black 70 $ -

0 In Stock
Need More?

EX/60 5X EPDM Black 60 $ -

0 In Stock
Need More?

Sours: https://www.globaloring.com/product-category/o-rings-metric-sizes/metric-vitonduro-o-rings/

Viton® 75 Specifications

Rubber Specifications

Welcome to our Viton® Specifications Section

Here you will find our Viton® specifications chart which can also be downloaded in PDF. The Viton® properties that are listed below are for our most popular Viton® 75 durometer (75A) rubber material. Make sure you review all of our other popular materials to ensure that the material you choose is correct for your application. If you need properties that are slightly different than the ones listed below, we can compound the formulation of the rubber material so that the Viton® rubber specifications suit your needs. Finding the correct material is important as the seal can degrade easily if the material is not compatible with the environment.

Viton FKM is DuPont-Dow Elastomer’s trade name for fluorocarbon elastomers. Fluorocarbon elastomers exhibit excellent resistance to high temperature and low compression set. They respond very well with resistance to ozone, high temperatures, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics and many organic solvents and chemicals over a temperature range of °F to +°F. Low temperature resistance for static applications is limited to approximately –40°F (–40°C) under special formulation. Under dynamic conditions, the lowest service temperature is between 5°F and 0°F (–15°C and –18°C). Gas permeability is very low and similar to that of butyl rubber. Special formulation can also improve resistance to water, steam, acids and fuels.

adobe pdf Download Viton® 75 Information in PDF

ASTM DesignationORIGINAL PROPERTIESASTM D SPECIFICATION
Durometer, Shore A75+/- 5
Tensile, psi (MPa), Minimum (10)
Elongation, % Minimum
Specific Gravity-
AHEAT AGE, 70 HRS @ C
Durometer Change, Points+10
Tensile Strength Change, % Maximum
Elongation Change, % Maximum
B38COMPRESSION SET, 22 HRS @ C
Original Deflection, % Maximum15
C12RESISTANCE TO OZONE
ASTM D, Method BNo Cracks
C20RESISTANCE TO OUTDOOR AGING
ASTM DNo Cracks
EF31FUEL AGE, 70 HRS @23C in Reference Fuel C
Durometer Change, Points+/-5
Tensile Change, % Maximum
Elongation Change, % Maximum
Volume Change, %0/+10
EO88FLUID RESISTANCE, 70 HRS @C in
Stauffer /SAE Fluid No. 2
Durometer Change, Points/+5
Tensile Change, % Maximum
Elongation Change, % Maximum
Volume Change, % Maximum+25
F15LOW TEMPERATURE BRITTLENESS
ASTM D, Method A,
3 Minutes @ CNon-Brittle

SPECIFICATIONS MET

ASTM D Grade M6HK A B38 C12 C20 EF31 EO88 F15

Sours: https://mykin.com/viton-properties
  1. Digestive system labeling
  2. Repair clinic order status
  3. Cat bath bag
  4. Garage wall cabinets
V Viton (FKM) Black 75

4, In Stock
Need More?

V Viton (FKM) Black 75

94, In Stock
, Factory

Stock

94, In Stock
, Factory

V Viton (FKM) Black 75

6, In Stock
Need More?

V Viton (FKM) Black 75

In Stock
15, Inbound
, Factory

V Viton (FKM) Black 75

66, In Stock
2, Factory

V Viton (FKM) Black 75

84, In Stock
12, Factory

Stock

84, In Stock
12, Factory

V Viton (FKM) Black 75

41, In Stock
54, Inbound
, Factory

V Viton (FKM) Black 75

14, In Stock
20, Inbound
11, Factory

Sours: https://www.globaloring.com/product-category/o-rings-standard-sizes/viton-fkmduro-o-rings/

FKM 75 O-Rings

About FKM 75 O-rings

FKM 75 material is the closest to a universal elastomer for sealing over other types of elastomers. Fluorocarbon o-rings are commonly referred to as a Viton o ring, or FKM, Fluorel, FPM o-rings.

FKMs can be divided into different classes on the basis of either their chemical composition, their fluorine content or their crosslinking mechanism. The latest FKM polymers have a much broader fluids resistance profile than standard fluoroelastomers. they are able to withstand strong bases and ketones, as well as aromatic hydrocarbons, oils, acids, and steam.

Due to its excellent aging characteristics, fluorocarbon (FKM) rubber is the most significant elastomer recently developed. Fluorocarbon elastomers are highly fluorinated carbon-based polymers used in applications to resist harsh chemical and ozone attack.

We can also supply Viton 75 which meets the requirements of FDA CFR title 21, section This compound is V75/FDA.

Sours: https://www.easternseals.co.uk/sealing-products/o-rings/fkm-o-rings/fkmo-rings/

Ring o viton 75

O-Ring, Viton, 75A Durometer, 1/32" ID, 3/32" OD, 1/32" Width, Black (Pack of )

Size:  |  Nominal Inside Diameter: Inches  |  Nominal Outside Diameter:3/32 Inches  |  Nominal Width: Inches  |  Inside Diameter String: Inches  |  Outside Diameter: Inches  |  Item Width String: inches  |  Number of Items:

This Viton O-ring is black in color, round in shape, has a durometer (hardness) of 75A, and is designed for use in a wide variety of sealing applications. Viton has excellent heat, fuel, and chemical resistance. Viton is acceptable for temperature applications between degrees F ( degrees C) to degrees F ( degrees C). It is compatible for use with non-flammable hydraulic fuels, silicone oil, chlorinated hydrocarbons (trichloroethylene), fuels, aromatic hydrocarbons (benzene) and aliphatic hydrocarbons (propane), as well as high vacuum environments, ozone, and weathering. Viton is vulnerable to low molecular organic acids, ammonia gas, alkalis, amines, glycol-based brake fluids, and super-heated steam. This Viton O-ring has a shore durometer of 75A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to , with indicating no indentation. O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in various sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter. This Viton O-ring meets standards defined by Aerospace Standard ASA, which is the Aerospace Size Standard for O-rings.

Sours: https://www.amazon.com/Viton-O-RingA-Durometer-Black/dp/BSLE5MC
Choosing O-Ring Compounds - Viton (FKM) O-Rings - The O Ring Store LLC

I don't think she noticed me then. This sight was then for a long time my best fantasy during masturbation. And I jerked off in my 15 years quite often.

Similar news:

First, three fingers penetrated the anuses of Daria and Nina, then four. A few minutes later, both of Kirill's brushes were deep in the asses of his grandmother and her neighbor. The guy knew the capabilities of these whores, so he soon clenched his hands into fists and wielded them in the pliable anus.



58 59 60 61 62