Torque wrench snapon

Torque wrench snapon DEFAULT

The Snap-on ATECH2FR125B is a new 3/8-inch drive flex-head digital torque wrench. The new torque wrench is part of the ATECH series but adds a wider torque range and better accuracy when using the flex-head.


Snap-on ATECH2FR125B Upgrades

The new Snap-on ATECH2FR125B digital torque wrench tackles 5-125 ft-lbs of torque. Automotive technicians should find this useful for passenger tires, engines, and suspensions. Snap-on engineered the yoke of the tool for a higher torque load by adding additional steel. It also has an extremely tight tolerance ratchet tang-to-yoke fit. Without compromising on the torsional strength, the new yoke also smooths indexing of the 80-tooth ratchet head up to 15 degrees. The smaller yoke-to-rachet gap also reduces potential pinch points.

The Snap-on 3/8-in Flex-Head digital torque wrench uses something called Multi-Axis Gyro Compensation (MAG COMP). It allows the tool to automatically measure its position and compensate for the change of length while in a flexed position. This makes the tool more precise while used between 0 and 15 degrees.

Snap-on ATECH2FR125B digital torque wrench

Because this digital torque wrench uses an 80-tooth ratchet, you get a short 4.5-degree arc. When using this automotive tool in tight spaces, that helps get the job done. It also meets or exceeds the ASME B107.300-2010 (B107.28) standard. The wrench uses AA batteries and includes a two-year warranty.

Snap-on 3/8-in Flex-Head Digital Torque Wrench Features

  • Four alert modes (LED, LCD, vibratory, and audible)
  • Six scales for precise measurements in both metric/SI and imperial units (ft-lb, in-lb, Nm, kg-cm, dNm, angle)
  • Torque-to-yield angle mode + torque-then-angle option
  • 10 presets
  • Cycle counter
  • Battery level indicator
  • Low profile buttons
  • Power interruption technology
  • Dual progressive LEDs and backlight LCD screen

Snap-on 3/8″ Flex-Head Digital Torque Wrench Specs

  • Drive: 3/8-inch
  • Head: Sealed flex head
  • Gears: 80 (4.5º action)
  • Range: 60–1,500 in-lbs/5–125 ft-lbs/6.78–169.48 Nm
  • Meets or exceeds ASME® B107.300-2010 (B107.28) standard
  • Assembled in the USA
  • Weight (w/o batteries): 2.2 lbs (0.9 kg)
  • Ratchet service kit: RKRFLLF80
  • Flex joint repair kit: RKRFLLF80JT
  • Power: 3 x AA batteries
  • Dimensions (WxLxD): 1-1/4 x 17-25/32 x 9/16 in.
  • Warranty: 2-years
  • Price: $579 (retail)

For more information, visit the snap-on website.


Sours: https://www.protoolreviews.com/trades/automotive/snap-on-3-8-in-flex-head-digital-torque-wrench-atech2fr125b/47961/

Current Issue

Anyone who has serviced engines (as well as certain driveline and chassis components) that date from roughly the early 1990s to the present is aware that many OE threaded fastener tightening requirements call for a combination of torque-plus-angle specifications as opposed to a torque-only spec. Common applications for this procedure include but are not limited to cylinder head fasteners, main cap fasteners and connecting rod bolts.

WHY TORQUE-PLUS-ANGLE?

Regardless of how silly the extra step of angle tightening may seem to some people, there is a legitimate reason for this approach…it’s better.

Remember that clamping load relies on bolt stretch (taking advantage of the bolt’s elastic properties). Since fastener engineers already know how much stretch, and therefore clamping load, will occur based on how far the bolt head rotates, they use the angle of bolt head movement to determine exactly how much load is being exerted.

A torque spec alone cannot be used to exactly determine bolt stretch because of the friction variables that come into play during tightening. A certain amount of torque loss is caused by the friction of the bolt head underside to the parent material contact surface (for example, where the bolt head contacts a cylinder head), and by the friction of the thread engagement. The type and amount of oil/lubricant on the threads provides yet another variable in terms of friction.

Depending on how smooth and burr-free the bolt head contact area is, and on how smooth and uninterrupted the threads are on both the bolt and the female threaded hole, a torque reading alone really can't provide accurate and consistent clamping load information.  If enough friction is created by these variables, a reading of, say, 60 ft. lbs. on a torque wrench may in reality only provide the equivalent of  (for example) 47 ft. lbs. that actually works to stretch the bolt. And if the bolt was designed to stretch to its just-short-of-yield point at a true 60 ft. lbs., this inadequate bolt stretch will mean insufficient clamping load. (which, in the case of cylinder head bolts, for example) can lead to a gasket leak or gasket failure down the road.

Torque-plus-angle simply provides a more accurate method of achieving the needed clamping load.

If published tightening specs only call for torque, then tighten accordingly. But for later model (domestic and import) applications that specify a torque-plus-angle method, you MUST follow those procedures in order to achieve design clamping loads.

Previously in order to achieve final angle-tightening, common methods included placing a reference mark (paint or pen) on the bolt head, and observing the angle of rotation (a “close enough” guesstimate of a movement of 90 degrees, or 45 degrees, etc., which is “close” but certainly not repeatable or consistent, or accurate). Another method is to use an inexpensive specialty tool that consists of a plastic or metal incremented dial that is placed onto a wrench drive, between the drive square and the socket wrench (angle gauge or protractor). This works, but it’s time consuming (torque to the required spec, remove the torque wrench, grab another square drive wrench, place the dial gauge onto the drive, attach a socket wrench to the dial gauge, re-attack the fastener and tighten to the required angle). Plus, if you bump the angle gauge or protractor, you lose your reference point, which means that you need to loosen the fastener and start over.

Thanks to advancing technology and the efforts of quality tool manufacturers such as Snap-On, those days are gone, providing you pony-up and take advantage of a new precision tool system.

TECHANGLE MODEL SPECS:

MODEL           SQ. DRIVE      ft.-lb.               Nm                    in.-lb.    Overload      Length

ATECH1FR240      ¼ in.        2.0-20.0         2.7-27.1            24-240       25           15 in.

ATECH2FR100      3/8 in.      5.0-100.0      6.8-135.6          60-1200    125         17 in.

ATECH3FR250      ½ in.        12.5-250.0    16.9-338.9      150-3000    312        26 in.

NOTE:When ordering your Tech-Angle wrench, be aware that different versions are available in terms of torque formats. If the model number ends in the letter “N,” this indicates that torque readings are only available in Nm (Newton meters). If you want to have a choice between Nm, ft-lb and in-lb, the model number should feature the letter “A” at the end (for example: ATECH3FR250N reads in Nm; while ATECH3FR250A provides options of Nm, ft.-lb. and in.-lb.). I learned this the hard way. The first unit I received was Model ATECH3FR250N. When I fired it up, I quickly realized that I didn’t have the option of switching to ft.-lb., since it only offered Nm. I swapped this out for ATECH3FR250A, which offers all three formats (Nm, ft.-lb. and in.-lb.). Of course, if your shop torques all fasteners in units of Nm, the dedicated Nm version (suffix N) would be ideal.

The Snap-On TECHANGLE wrench digitally displays and monitors both fastener torque and angular rotation. The wrench functions as an adjustable torque wrench, as you’d expect, and also functions as an adjustable angle wrench, simultaneously monitoring torque to prevent fastener or wrench overload.

The preset values are programmable from 5% to 100% of full-scale torque and 5 to 360 degrees  of rotation. The scrolling digital display rolls over at both ends for convenient and quick setting.

If the wrench is used beyond 100% torque capacity, an audible tone will pulse rapidly to warn the user to stop.

To preset the wrench, select unit of measure (Nm, ft.-lb., in.-lb. or degrees). Use the UP/DOWN keys to set the torque value or angle degrees required.

In the torque display mode, the display shows the torque preset value until 5% or more of full scale torque is applied. The display then switches to TRACK mode, showing the applied torque in real-time. When applied torque is within 2% of the preset value, the buzzer will sound for ½ second and the handle will vibrate until the applied torque is released. At torque-release, the display shows the PEAK value applied (this flashes for 10 seconds). If torque is re-applied during this 10-desond period, the display will automatically switch to TRACK mode (again, to show applied torque in real-time). NOTE: If any button is pushed during this 10-second window, the PEAK value will be cleared.

In the angle display mode, the display shows the angle PRESET value. Angle measurement is held in reset until 5% of torque is applied. When applied torque is released, the accumulated torque and angle values will flash alternately for 10 seconds. The display will continue to accumulate if torque is reapplied within this 10-second period (this allows time for changing the wrench to reverse ratchet motion if needed). When the accumulated angle equals the preset angle, the buzzer will sound for one second and the handle will vibrate until torque is released. Once the angle preset has been reached, and once torque has been released, the total angle accumulation and the peak torque value will be displayed alternately for 10 seconds (or until any key is pushed). If the angle preset is reached and torque is released, angle accumulation resets to zero automatically. This provides time to move to the next fastener (this gives to 10 seconds to move to the next fastener without the need to re-program).

MY TEST

I first dropped three fresh AA batteries into the grip (unscrew the end-cap, insert all three batteries with positive end first and reinstall the cap, being careful not to cross-thread the cap. If you do cross-thread the cap, proper contact won’t be achieved and the unit won’t power-up). For the sample test, I chose a 1999 GM 5.3L cast iron block (LS type). The main caps utilize four 10mm primary bolts and two 8mm side bolts per cap. The inboard cap bolts call for an initial torque value of 15 ft-lbs, finished with 80 degrees of rotation. The outboard 10mm bolts (these feature stud tips for the oil pump pickup and windage tray) call for an initial 15 ft.-lbs. followed by 53 degrees of rotation. Once the 10mm main cap bolts are fully tightened, the 8mm side bolts are snugged to a value of 18 ft.-lbs.

 

 

During tightening of the inner and outer main cap bolts on this 5.3L block, I preset torque at 15 ft.-lbs. With the Tech Angle wrench set to the ft-lb mode and set at 15 ft-lb, I began to apply torque. The instant I hit 15 ft.-lbs., the alarm sounded, instantly followed by very noticeable grip vibration and a buzzing sound. I torqued all of the inner and outer cap bolts (in proper sequence) to this initial 15 ft-lb value. I then pressed the “U” button to switch to angle mode, and adjusted desired angle to either 53 or 80 degrees (remember: the LS calls for two different angle values, for inboard and outboard cap bolts). As I tightened each bolt, as soon as I reached the programmed angle value, the alarm sounded, instantly followed by grip vibration and buzzing. If all cap bolts called for the same angle value, I could have simply preset one angle value and finished tightening. However, because this wrench allows you to quickly re-adjust values, switching from 80 to 53 degrees (depending on which bolt location I needed to address), the task went quickly (immensely faster than if I was forced to use an angle gauge).

The audible and vibration alerts ensure that you’re instantly and clearly informed of reaching your preset value, even in the noisiest of shops. If you can’t hear the chirp or buzz (you’d have to be deaf not to hear this), you’ll definitely feel the vibration in the grip.  I found this tool not only easy to use, but quick and repeatable. And because of the projection hump on the grip, I could lay the wrench onto my workbench without fear of it rolling off. The 15-degree pivot built into the drive head comes in handy too, especially when a nearby object is slightly in the way of your tightening path.

I won’t try to toss any BS here…. admittedly, this tool is expensive (at a suggested list of about $515), but as we all know, quality precision tools are never cheap. Considering it’s precision, construction quality and it’s time saving capabilities, it’s a solid investment, especially for the technician who cares about the quality of his work (notice how often I refer to the word “precision?” It’s not an accident. This is one of the crown jewels in my engine assembly room).

NICE FEATURES

The grip features not only a rubber surface for non-slip and comfy operation, but a forward “nub” stand is placed at the front of the grip area. This prevents the tool from rolling off of a table (very cool feature that all torque wrenches should have). Also, the sealed key pad prevents dust and grit. Actually, construction of the entire tool is designed to be splash proof, protecting the tool from water and most shop chemicals (I don’t recommend using the tool underwater during submarine maintenance, but it should survive your shop environment). 

Also, the flex head pivots 15 degrees in either direction (up/down), for convenient fastener access, without screwing up torque or angle calibration. Also, once you’ve pre-set your torque and angle once torque is reached (the alarm sounds and the handle vibrates and buzzes), simply press the “U” button to switch to angle mode and continue to tighten. Once the preset angle is reached, the alarm sounds and the handle vibrates and buzzes. And, you can actually ratchet during angle tightening. According to Snap-On, this is achieved by using angle calculations based on the same gyroscope technology featured in helicopters (how cool is that?).

I love tools. I use them, and sometimes abuse them, but I still get excited when trying out a new tool (hand tool, pneumatic, electric, etc., it doesn’t matter). This new torque/angle wrench is an absolute funfest. It’s handy, it’s a quality precision tool and it works as designed. It just doesn’t get any better than that. In the future, every time I need to perform a torque-plus-angle tightening on a bunch of head bolts, I’ll be smilin’.

TO AVOID WRENCH DAMAGE

-          Never use this wrench with the power turned off.

-          Do not press the ON/RESET button while torque is being applied or when the wrench is in motion.

-          Never use this wrench to break fasteners loose (the same holds true for any torque wrench).

-          Do not use extensions (such as a pipe) to extend the length of the handle.

-          Check that the wrench capacity matches or exceeds each application before proceeding.

-          If the wrench is dropped, calibration must be re-verified.

-          Always make sure that the ratchet direction lever is fully engaged in the correct position.

-          Don’t force the head of the flex-head against the stops.

-          Always pull (never push) on the wrench handle, and adjust your stance to prevent a possible fall if something slips/fails.

OUR TEST TOOL SPECS

MFG………………Snap-on

P/N………………..ATECH3FR250A

SUGG. PRICE………$515

SQUARE DRIVE…………1/2-in.

HEAD TYPE………………Sealed flex head

GEAR TEETH………………36

GEAR ACTION…………….10 deg.

HEAD DEPTH…………….3/4-in.

HEAD WIDTH……………1 5/8-in.

RANGE IN-LB…………….150 – 3,000 in.-lbs.

RANGE FT-LB…………….12.5 – 250 ft.-lb.

RANGE Nm………………..17.5 – 340 Nm

ANGLE RANGE……….5 – 360 degrees

OPERATING TEMPERATURE…..40 – 110 degrees F

STORAGE TEMPERATURE……..0 – 122 degrees F

DISPLAY……………Four-digit LCD, unit of measure, angle, CCW and battery condition

OVERALL LENGTH…….26 in.

WEIGHT………………..3.7 lbs.

 

Sours: https://www.autoserviceprofessional.com/articles/2600-testing-snap-on-s-electronic-torque-angle-wrench
  1. Gelato 33 seed junky genetics
  2. Ortho wand battery replacement
  3. Candy crush level 4500
  4. Send message on instagram using python

Snap-on Control Tech Industrial Torque Wrench

Myron Bowling Auctioneers

The new Control Tech Industrial Torque Wrench from Snap-on Industrial unites torque and angle in a single mode to provide the most accurate and fastest way to achieve torque.


Snap-on Control Tech Industrial Torque WrenchThis patent-pending technology provides control torque accuracy to +/- 2% clockwise, +/- 3% counterclockwise, and control angle accuracy to +/- 1% of reading.

The Control Tech Industrial Torque Wrench is made to withstand demanding applications. Its rugged, all-steel construction makes it durable on the job site, and it comes with an industry-leading two-year warranty. Every model features a large, backlit LCD screen for enhanced visibility in a variety of working conditions, with high storage capacity for 1,500 readings.

Features and benefits of the Control Tech Industrial Torque Wrench include:

  • 3/8-inch or 1/2-inch drive-sealed flex head, or interchangeable head versions available
  • Easy-to-use software to download data for audit and analysis
  • Forty memory presets that are fully programmable and that can be locked to prevent inadvertent changes or tampering
  • Multi-sensory indicators such as easy-to-read LCD screen, LED indicator lights, and an audible alert and handle vibration that work together to signal when torque is within the targeted range
  • Dual 80® Technology for precise yet strong ratchet function with minimal ratcheting arc for use in tight areas (CTECH2FR100 and CTECH3FR250)
  • Programmable calibration-needed indicator
  • All-metal construction in an electronic torque wrench
  • Automatic calibration factor makes use with adaptors easier

www.snapon.com/industrial

SPONSORED ADS

Sours: https://industrialsupplymagazine.com/pages/Product---Snap-on_080713.php

Snap-on ATECH2FR125B 3/8-in. Drive TechAngle Flex-Head Torque WrenchThe new Snap-on ATECH2FR125B 3/8-in. Drive TechAngle Flex-Head Torque Wrench provides the same benefits as fellow ATECH series tools, but with more range, strength and accuracy, the company says.

With a 5-125 ft.-lb. working range, technicians are able to use this torque wrench for a wider array of applications including passenger tires, engines and suspensions. The tool’s strong yoke is engineered for a higher torque load with added steel mass, as well as an extremely tight tolerance ratchet tang-to-yoke fit. Without compromising on the torsional strength, the heavy-duty yoke also provides technicians a smooth indexing movement of the ratchet head up to 15 degrees, and the smaller yoke-to-rachet gap reduces potential pinch points for increased safety, Snap-on says.

The company says the ATECH2FR125B becomes even more precise while in a flexed position (from 0 to 15 degrees) due to the patent-pending Snap-on Multi Axis Gyro Compensation (MAG COMP) that allows the tool to automatically measure its position and compensate for the change of length. The 80-tooth ratchet offers a shorter, 4.5-degree arc making it easy for technicians to work on fasteners in confined spaces and meets or exceeds the ASME B107.300-2010 (B107.28) standard. The wrench operates on AA batteries and comes with a two-year warranty.

Features of the ATECH2FR125B include four alert modes (LED, LCD, vibratory and audible); six scales for precise measurements in both metric/SI and imperial units, plus angle; 10 presets for easily recalling commonly-used torque specifications; cycle counter to help techs keep their tool calibrated; torque then angle option for bolts that require specific applications of both measurements; battery level indicator; low-profile buttons; power interruption technology; and dual progressive LEDs and backlit LCD screen.

Sours: https://www.truckpartsandservice.com/business/growth-strategies/article/14989342/snap-on-debuts-new-drive-techangle-flex-head-torque-wrench

Snapon torque wrench

Our Lowest Price - This product is ineligible for additional discounts or rebates.

This is the part number or identifier for this item from the manufacturer

In stock orders usually ship in 1-2 business days.

This gives you an estimate of when an item should be available to ship once ordered.

Sorry. This product is sold out and not currently available.

You are browsing an Industry Catalog. We've simply republished information exactly as we got it from our supplier without curating or improving it. The product names, descriptions, and photographs within this expanded catalog have not been reviewed and may contain industry short-hand and technical jargon. Please carefully study each product before you place your order. learn more

Buy this product and your entire order ships for free.

Some orders are inelligible for delivery discounts. See offer details for disqualifying products and destinations.

Snap-on Industrial Brands Torque Wrench, 1/4", 20-150in.lb (2.26Nm-16.95Nm)

your price $249.40 + ships free

WatchWatchPART NUM 373104
Sours: https://www.modernbike.com/snap-on-industrial-brands-torque-wrench-1-4-20-150in.lb-2.26nm-16.95nm
Snap-on - VS - Harbor Freight ( ICON ) 1/2\

Click-type torque wrench

The click-type torque wrench is a special type of torque wrench.

The click-type torque wrench in a proper sense is a special type of torque wrench.  It is used for setting and adjusting the correct torque in order to prevent using too much power when tightening a screw. Once the preset torque is reached, the wrench „nips off” to prevent using more power on tightening.


Automotive

This variant of the torque wrench is frequently used in the automotive industry where tightening of wheel bolts requires a certain amount of torque. Aluminium rims for example require a particular amount of torque to ensure driving safety.

Snap-on offers a wide range of torque wrenches. In addition to classic wrenches, electronic torque wrenches are available too. We have the tool that fits your needs.
 

Torque wrench

Snap-on creates the tools that allow you to apply the perfect amount of torque every time. And when you know you're delivering precisely the right torque, it takes a huge weight off your shoulders.

As the industry leader in torque tools and selection, Snap-on helps you keep planes in the air, trucks on the road, heavy equipment operating, and more. From our mechanical Torque Wrenches to our advanced ControlTech Electronic Torque Wrenches as well as our pneumatic and hydraulic solutions, we deliver the torque that sets the standard.

And for more information on the calibration services and training we offer, talk to your Snap-on representative.

Sours: https://www.snapon-industrial.co.uk/tools-in-focus/click-type-torque-wrench.html

You will also like:

Went up to Chris. Taking Chris by the hair, he literally pulled her head to the fly of the military man, and he had already managed to unbutton his pants and take out. His penis. Chris, realizing what she should do, began to work with her mouth, occasionally helping herself with her hands, the man in.



7180 7181 7182 7183 7184