Best rc trainer airplane

Best rc trainer airplane DEFAULT

Best Beginner RC Planes

If you're new to the radio control flying hobby, you're more than likely getting a bit overwhelmed with the choice of rc planes out there. Man, it's overwhelming for the experienced hobbyist, let alone for a total newbie!

There's a multitude of rc airplanes these days, waaaay more than there ever was when I learned to fly back in the early s. So it's not too surprising that you're scratching your head about which plane to buy.

My general beginner rc planes page will give you vital information about what to look for in your first radio control plane, but listed below is a small selection of what I consider to be some of the better beginner rc planes available.

(Shameless plug time My ebook The Beginner's Guide To Flying RC Airplanes goes above and beyond all you need to know to get started in this truly addictive pastime!)

The planes shown below come from Horizon Hobby and I can personally recommend the quality of their brands. I don't work for Horizon, nor do I receive their products for free, but I've had more than a few of their aircraft over the years, and I do genuinely think that Horizon brands offer great value, with a solid support network for any after-sales issues.

My recommendations for the best beginner rc planes currently on offer (in size/price order) are

HobbyZone Sport Cub S RTF.

Best beginner rc plane HobbyZone Sport Cub S

With a wingspan of just over mm (approx. 2ft.) the 4-channel Sport Cub S is small and perfectly suitable for self-teaching. Admittedly, small isn't always best for learning to fly rc because, generally, bigger planes fly better. Smaller ones can be twitchy, and disorientation can be more of a problem. But with that said, the trademark Horizon Hobby auto-stabilization technology makes life easier, and this beginner rc plane has been a big hit with newbie rc pilots.

There are three advantages with smaller rc planes - they're cheaper to buy, easier to transport and store, and they can be flown in smaller areas.

At around $, the Sport Cub S RTF comes with everything you need to get flying. It's an excellent deal and a great little plane for your first one.
See the HobbyZone Sport Cub S in more detail.


HobbyZone Mini Apprentice S RTF.

Best beginner rc airplane Mini Apprentice

At mm (approx. 4ft.) wingspan, the Mini Apprentice S is mm (1ft) smaller span than it's popular cousin, the Apprentice 15e. This makes it that bit more manageable and more likely to fit in a smaller car, whilst still being an ideal size for a first rc plane.

The Mini Apprentice is also a 4-channel beginner plane and, like the Sport Cub S, comes equipped with Horizon's SAFE™ technology. It's a very stable flyer and a great all-round trainer plane and - like its bigger cousin - the popularity of this plane speaks volumes.

Whilst a 4-channel plane (motor, ailerons, elevator and rudder) does make the learning curve a bit steeper than 3-channels (no ailerons), you'll be rewarded with a more agile plane and one you can have more fun with.
See the HobbyZone Mini Apprentice S in more detail.


HobbyZone Carbon Cub S+ RTF.

Best beginner rc airplane Carbon Cub S+

Similar to the Mini Apprentice in wingspan (at mm), the Carbon Cub S+ is a scale airplane based on the full-size Carbon Cub kit plane. With flaps and chunky tundra tyres, the Carbon Cub S+ is a great looking plane and a lot of fun can be had with its short take-off capabilities!

The presence of flaps means another channel (so 5-channel) but don't let that put you off; flaps are easily mastered and make flying the plane even more realistic. With full flaps deployed, short steep approaches are the order of the day!

What sets the Carbon Cub S+ apart is the GPS-equipped technology, in addition to the usual SAFE™ technology. In short, the GPS technology will set up a geo-fenced area which your Cub cannot fly out of.
It also offers a return-to-home facility and a pattern holding facility. Yes, it's more to think about when first setting up your plane, but if you're a techno-geek then this is the plane for you!

Truthfully, I've flown this Cub and I think it's one of the nicest beginner planes currently around. If your budget allows, go for it - otherwise put it on your list to Santa!
See the HobbyZone Carbon Cub S+ in more detail.


So there you have just a few best beginner rc planes. You won't go far wrong with anything from the Horizon Hobby range - the quality is good, support is good (from my personal experience) and buying an RTF (Ready To Fly) beginner plane means that everything you need to get flying is included in the box.

Of course, your budget is probably going to be a deciding factor when choosing your first beginner rc plane but the good news is that you don't have to spend a lot to get flying these days! My advice is to buy the best you can afford, and be prepared for small extra costs (spare parts etc).

Visit my RC Airplane World Flight School pages to read about self-teaching, and also consider buying a rc flight simulator if you are serious about the hobby. And, of course, my ebook

Happy landings!


Related pages

Related pagesBeginner rc airplane overview.

Related pagesLearning to fly rc airplanes.

Related pagesHow to fly airplanes.

Related pagesRC airplane training methods.

Related pagesRC flight simulators.

Related pagesRC trainers.


Best RC Trainer Planes &#; Top 10 RC Planes for Beginners in

Taking flight is one of the most exciting and pleasurable activities in the entire world, and many people do it every day without even leaving the ground. They do this with an exciting and increasingly popular hobby &#; flying RC airplanes.

a guest post by Johnny Romano

Remote control airplanes are becoming cheaper by the day due to the advancement in the technology used in the making. There are now smart features that allow you to utilize digital connectivity in their operation. Cool right? But why spend hundreds of dollars on a plane and not be able to get it off the ground, or worse, crash it? The prudent approach, both fiscally and mentally, is to start with a trainer plane, this is the right plane for beginners. It is has a configuration that makes an is easy to handle, forgiving, and solid that will help you learn the RC flight basics.

It also gives people all of the power of flight and the ability to conduct complex flying stunts without the danger of going thousands of feet in the air.

The most exciting thing about RC airplanes is that they are accessible to people of all different ages and backgrounds.

You can get started on this interesting and fun hobby right now with the click of a button. Before you know it, you’ll be building or flying your very own RC airplane.

Flying RC model airplanes is guaranteed to put a smile on your face. And, if you’re looking to put a smile on the face of your little boy or girl, try putting a fun toy R/C plane under the tree this Christmas.

Or, why not just bring one home for fun? Flying RC model airplanes is a great way to bond with the kids, who will love to build and fly their own creations.

But, first of all, let&#;s see what are the best RC trainers and how to choose the right one for your needs.

Best RC Trainer Planes

RC Planes Design Information

High wing design &#; A high wing design on a plane allows the aircraft to have much better stability. The weight of the fuselage below the wing will always stabilize the model in flight because the fuselage weighs more than the wing.

For example, when you turn the plane will level itself out because the bottom will be weighing it down. Electric RC trainers have a high wing design, which is one reason they are ideal for beginners.

Low wing design &#; The opposite happens here. The fuselage is heavier above the wing, so it will not level itself. This is mainly used if you want your model to do aerobatics.

What is the right size? &#; Most trainers come in a 40 or 60 size, meaning cubic inch (ci) and “60” ci engine capacity.

While a bigger aircraft is more visible in the air, and also more stable when flying, that’s not the only thing you should look for. You also need to make sure your aircraft will fit into your car easily, so you can take it to the flying area.

Along with choosing a high or low wing design, you need to look at the wing shape. There are three types of wing shapes. A flat bottomed wing provides the most lift, even at slow speeds.

That of course is perfect for beginners. Next is a symmetrical wing shape, which basically makes the airplane equally stable everywhere. The third wing shape is a semi-symmetrical wing. A semi-symmetrical wing has qualities of both the flat and symmetrical wing design and is good for sport flyers.

A couple of other factors you need to look at are the dihedral length (v shape fin in very back) and the undercarriage layout. For the dihedral, if you want your electric RC trainers to be more centered, then you want a bigger dihedral. Of course, if you don’t want it to stay perfectly centered, then there should be little or no dihedral. As for the undercarriage layout, you can either have a tricycle or a tail dragger layout.

A tricycle layout is basically two wheels underneath the wing section and another wheel in the front. This is ideal if you are a beginner and need help keeping your plane straight when taking off. A taildragger layout is exactly that, the plane sort of drags its tail. There are two wheels underneath the wing section and a little wheel underneath the tail.

Buying Tips &#; What Is the Best RC Trainer Plane for Me?

So, with what you have learned you might be saying “what do I choose then?”

Well for the beginner I recommend

  • a high wing design,
  • flat bottomed wing shape,
  • at least a 4-inch dihedral, and
  • a tricycle undercarriage layout.

The airplanes I recommend below mostly match these specifications, so just get one of those if you have any doubts.

Also, before you start spending money, ask yourself these questions:

  • How much do you want to spend?
  • How fast do you want your airplane to go?
  • How far do you want it to go?
  • Do you want a scale model (realistic model) or a non-scale model?

After you have answered those questions above, you can start looking for the right plane.

Start with a size or size trainer!!! Most beginners are very surprised at how fast and powerful “trainers” really are. And a good trainer is very capable of basic aerobatics- loops, rolls, inverted flight, etc. Sport planes are too much for most beginners and will only extend the learning curve (and they can be hard on an instructor’s heart!)

So, if you need a plane for practicing, then you want electric RC trainers. Most high-wing trainers on the market are good-flying airplanes. I like RC trainers, especially electric ones, so much because they are designed with the beginner in mind.

These planes have more stability, increased durability, and the parts are easier to remove and replace than other airplanes. Electric RC trainers come either ready to fly or almost ready to fly. If you want to start flying right when you get the plane, then I recommend you choose an RTF model.

If you want a little assembly for your model airplane, then go with an ARF. There are also kits available and require building the plane from scratch out of balsa wood. Since beginners are usually the only ones buying electric RC trainers, I don’t see why they would want a kit that is complicated and requires expertise to build.

Now you can head on down to your local hobby store and browse around with confidence being more familiar with what you see.

Let&#;s Start Flying!

Any beginner can fly electric RTF and ARF RC airplanes. If you want to learn to fly your plane, I suggest you buy a good RC airplane book and practice flying your electric airplane. Since there slower and cheaper than gas RC airplanes, it’s okay if you make some mistakes.

Before you get started flying gas powered RC planes, you need to prepare. There are too many great books, magazines, instructional videos, and simulators to help you. You could also consider hiring an RC airplane flight instructor from a local club.

If you still think you might need help flying your RC airplane, check out the learn to fly page for more information.

Final Words &#; Flying R/C Model Planes really is for anybody!

Imagine flying high above the stresses of the real world and getting lost in the wonder of the wide-open blue sky. There is nothing more freeing than rising off the ground and soaring through the air.

You have the ability to do what so many people have only dreamed of for thousands of years. All you have to do is click here and fulfill your dream of escaping into the sky.

In the entire world, there has never been a hobby that helped people to reach such exciting heights.

Now you have to make a decision. If you are deciding not to purchase one of my recommended planes, then be sure to keep those tips above in mind when choosing. Basically just choose a high wing design, flat bottomed wing shape, at least a 4-inch dihedral, and a tricycle undercarriage layout.

  1. Adventure time figures
  2. Possession of hypodermic needle
  3. Video shoot locations
  4. 38 special boot holster
  5. Sheboygan county chamber cash

8 Best RC Trainer Planes for Beginners

3D Insider is ad supported and earns money from clicks, commissions from sales, and other ways.

DJI has just released the Mavic Air 2. See all of the specs here.

Not all remote controlled trainer planes are easy-to-fly toy models though some are. Trainers should share common characteristics whether they’re toy-grade or hobby-grade. The one you choose needs to reflect your skill level and ambitions. The type of plane you want to fly may look quite different to the one you learn with. The apprentice who starts low gets to aim high later and makes a better pilot.

It’s not difficult to find RC training planes, but it’s vital to get it right. There are several things to consider that can help novice pilots make better-informed choices.

HobbyZone Champ RC Trainer
Wing: High
Type: RTF
All batteries, replaceable parts, hand launch, steerable tail wheel.
Check Amazon
Best Value
Umx Cessna RC Trainer
Wing: High
Type: BNF
Realistic design, brushless motor, 4 channel control, steerable nose wheel.
Check Amazon
Top Pick
Carbon Cub S+ RC Trainer
Wing: High
Type: RTF
Oversized Tundra tires, optional flaps & floats, brushless outrunner motor.
Check Amazon

5 Characteristics of an RC Trainer Plane

Capable RC trainer planes check the boxes of some or all the following points:

  1. Available as Ready-to-Fly (RTF) or Bind-N-Fly (BNF)
  2. High wing design with wing dihedral (upward ‘V’ angle)
  3. Flat bottom wings
  4. Two or more flight modes
  5. Rugged, crash-resistant construction

These are points for consideration and not must-have features. The model you opt for is down to personal style, ability, and a model’s combined attractions. This introduction gives you something to think about and acts as a foundation. Let’s now look at each of the above points in more detail.

#1 Ready-to-Fly (RTF) Vs. Bind-N-Fly (BNF)

Anyone keen to learn from scratch—or learn a new way of flying—wants to start asap. The way to do this is to choose a model that’s ready to fly (RTF) right out of the box. RTF trainers come with a simple set of instructions and a pre-built aircraft. You may need to recharge the battery, but then you’re good to go. Always allow time to go through the user guide once or twice before that maiden flight.

Some RC’ers opt for a bind-n-fly (BNF) aircraft. BNF planes are ideal for pilots who already own a compatible transmitter, flight battery, and charger. The advantage of BNF electric planes is that you can use the same controller with many BNF models. That’s attractive for anyone who owns—or expects to build—a fleet of radio-controlled airplanes.

You’re ready to start flying lessons whichever of the two options you choose.

#2 High Wing Design Matters

RC electric airplanes are available with the following three wing configurations:

  1. High wing (fuselage is below the wing)
  2. Low wing (fuselage is above the wing)
  3. Mid Wing (wing is halfway between the top and bottom of the fuselage body)

The high wing design is ideal for trainer planes as it offers better flight stability. A high-wing configuration makes the aircraft bottom heavy which naturally forces it to self-correct.

#3 Flat bottom Wings

Radio-controlled planes are available in the following 3 wing shapes (airfoil):

  1. Flat bottomed
  2. Semi-symmetrical
  3. Symmetrical

The flat bottom wing (1) offers the most flight stability. The downside of a flat bottom airfoil is that it’s the least maneuverable (less aerobatic) of the three. That&#;s also an advantage for total beginners. This design also produces more lift at slower airspeeds than symmetrical and Semi-symmetrical airfoils.

#4 Flight Modes

Some RC trainer planes come with two or more flight modes. These can be useful for two reasons:

  1. New pilots learn at a pace that’s comfortable to them
  2. Saves upgrading to a new plane as skills develop

Flight modes can be Beginner, Intermediate and Experienced. Some aircraft may have a simple Slow/Fast speed option. Then there are unique modes like Panic Recovery. Each review lists any learner-friendly methods a plane has and their effectiveness.

#5 Rugged, Crash-Resistant Build

These aircraft are much more stable than they used to be, but they can still come down. Newbie crashes are an inevitable part of the learning process. There are two things to consider:

  1. The RC aircraft can withstand mild to moderate accidents
  2. Replacements parts are readily available and affordable

That last point is vital. Something as simple as a cracked propeller can ground an otherwise intact plane. Therefore, you need to know that spare parts are accessible and affordable.

Other considerations pertain to all RC electric airplanes, and not only trainers. They include things like the flight time on a single charge and how long it takes to recharge a flat battery. Most pilots invest in extra batteries so think about the cost and availability. Flight range is another buying factor for some.

About My ‘Remote Control Trainer Planes’ Guide

The trainer planes in this guide are the result of careful research. All models are worthy contenders in their respective class and price category. I also took the opinions of industry experts and user reviews into consideration before compiling the final list. The first three reviews are Editor’s Choice for Best Budget, Best Value, and the Top Pick. The trainer planes below those are by price, lowest to high.

This table shows the models for review. Feel free to jump to the RC trainers that interest you.

Remote Control Trainer Planes Comparison Table

1. HobbyZone Champ RC Trainer Plane | Best Budget

HobbyZone Champ RC Trainer PlaneView on Amazon

Editor’s Rating: /5

The HobbyZone Champ RC Trainer is an excellent choice for anyone who wants to learn how to fly. It’s entry-level flight characteristics ensure stress-free experiences for newbies.

  • Best feature 1: Detailed instruction manual with beginner flying tips
  • Best feature 2: Durable, crash-resistant construction
  • Plus points: All batteries, replaceable parts, hand launch, steerable tail wheel, carry box
  • Minus points: Fragile to handle, short flight time

What We Like About HobbyZone’s Champ

Everything you need to start flying the Champ is right there in the box, including all the batteries. Most RC planes don’t include the transmitter batteries, so it’s a welcome touch. The Champ’s detailed instruction manual is another bonus. It has plenty of learner flying tips and safe practices. That’s unique in as much as it’s written with the novice clearly in mind.

Another great feature is that you can fly the Champ RC aircraft just about anywhere. It doesn’t need vast amounts of open space or long runways to take off and land. Pilots can enjoy this small foam model in large back yards, a cul-de-sac, and at parks, etc. You can get the plane airborne in a moment using the hand launch. And the steerable tail wheel makes it easy to drive the craft on the ground.

Durable and Protected

The plane is durable and stands up to newbie crashes and hard landings well. Despite that, it still needs careful handling (see below). All the spare parts are available if something does break. HobbyZone’s Champ comes in a sturdy cardboard box that’s more than just packing. It also acts as an excellent carry case and storage container for when you’re not using the plane.

The Not So Good

This RC plane is durable, but it’s also ultra-lightweight. It stands up to crash landings well but not rough handling. Those new to RC planes are more likely to damage the Champ with their hands than a crash. Be gentle with it, and you’ll be fine. The flight time on a single charge is 7–8 minutes at most. That’s average but not long enough, so an extra battery pack or two is a wise investment.



Tech Specs
Plane type: RC RTF Park Flier
Dimensions: x x ”
Material(s): Foam
Flying Weight: oz.
Max Range: Not specified
Battery: V 1S mAh Li-Po
Max flying time: 8 minutes
Charging time: 30 minutes
The Pros
Detailed, beginner-friendly guide
Durable, crash-resistant build
Easy for first-time pilots
All batteries included
All replaceable parts available
Hand or ground launch
Steerable tail wheel
Sturdy carry/storage box
The Cons
Fragile to handle
Short flight time

2. E-flite BNF EFL Umx Cessna Basic | Best Value

E-flite BNF EFL Umx Cessna BasicView on Amazon

Editor’s Rating: /5

The Best Value pick goes to the E-flite BNF EFL Umx Cessna Basic. This is a gorgeous RC trainer plane that sports a realistic design. It’s also an incredibly stable flier—essential for newbies.

  • Best feature 1: Easy to fly at the beginner level
  • Best feature 2: Optional SAFE™ Select flight mode
  • Plus points: Realistic design, brushless motor, 4 channel control, steerable nose wheel
  • Minus points: Bind-N-Fly (also a pro), short flight time

What We Like About E-flite’s Cessna Basic

It looks fantastic, and that’s not something all RC trainer aircraft can claim. There’s a lot of attention paid to the finer details. Some of those include wheel pants, panel lines, and cowl inlets. The optional SAFE™ Select flight mode is ideal for beginners as it auto self-levels when activated. That lets novice pilots focus more on flying fun and less on correcting the plane during flight.

There’s plenty to exploit as learners gain experience. The Cessna boasts a powerful size brushless motor and full 4+ channel (CH) controller. That means rudder, throttle, elevator, and ailerons. And the steerable nose wheel makes light work of taxiing on the ground.

The Not So Good

This trainer plane is a Bind-N-Fly (BNF) model which means it needs extras to complete. They include a full-range, 4+ CH DSMX®/DSM2® transmitter, flight battery, and charger. The batteries should be –mAh 2S LiPos. A mAh should give around 8 minutes of flight time in SAFE Select mode. BNF planes are also a pro for those who have other BNF models as they can share the same transmitter.



Tech Specs
Plane type: BNF Ultra-Micro Trainer
Dimensions: x x ”
Material(s): Foam
Flying Weight: oz.
Max Range: Depends on transmitter
Battery: –mAh LiPo (not included)
Max flying time: 8 minutes
Charging time: Depends on transmitter
The Pros
Easy to fly at beginner level
SAFE™ Select flight mode
Bind-N-Fly (also a con)
Realistic details
Powerful brushless motor
4+ channel control potential
Steerable nose wheel
The Cons
Bind-N-Fly (also a pro)
Short flight time

3. HobbyZone Carbon Cub S+ RTF RC Trainer | Top Pick

HobbyZone Carbon Cub S+ RTF RC TrainerView on Amazon

Editor’s Rating: /5

The Carbon Cub S+ is our Top Pick remote controlled trainer plane. It has everything you need to fly right there in its box. This is perhaps the easiest, most versatile, beginner RC airplane around.

  • Best feature 1: Anyone at any level can fly this model
  • Best feature 2: SAFE Plus GPS-enabled drone technology
  • Plus points: Oversized Tundra tires, optional flaps & floats, brushless outrunner motor
  • Minus points: Missing status indicators, short flight time

What We Like About HobbyZone’s Carbon Cub S+

The SAFE Plus GPS-enabled drone technology is unique (see next). HobbyZone’s Carbon Cub S+ is the ultimate all-purpose plane for users at different levels. That means learner pilots can enjoy the same model as their skills advance. The three flight modes are Beginner, Intermediate, and Experienced. Each one gives the operator a set of controls to match ability and experience.

Sensor Assisted Flight Envelope(SAFE) Technology

The 3 flight modes limit pitch and bank angles though there’s more to SAFE than this, e.g.

  • AutoLand: brings the plane down safely with the press of a button
  • Holding Pattern: brings the plane back safely to its pre-defined GPS point
  • Virtual Fence: an invisible boundary that the plane won’t pass
  • Panic Recovery: automatically brings the aircraft back to level flight

All RC pilots appreciate these features, but they&#;re especially welcome at the entry level. There’s more too. The Carbon Cub S+ has oversized Tundra tires with multi-terrain capability. They can steer the plane across ground surfaces other models can’t go like grass, dirt, and gravel.

Functional Flaps and Floats

It’s possible to add flaps and floats (not included) to make the plane even more versatile. The functional flaps give the plane short takeoff and landing (STOL) capabilities. It also needs a 7CH+ computer transmitter and a couple of other component upgrades. It’s good to have the option, though. And an optional float set can turn the Carbon Cub S+ into a capable float plane within minutes.

The aircraft boasts a powerful ParkZone BL outrunner motor and ParkZone servos. It comes with a Spektrum DXe GHz transmitter and mAh 3S V 20C LiPo. There’s also a DC charger plus an AC Adapter included. This exquisite model is ready to fly (RTR) right out of its box.

The Not So Good

There are a couple of missing indicators which is a surprise. There’s no indicator to show which Virtual Fence (VR) mode you’re in, or even if it’s in VF. Nor is there an indicator to show successful Compass Calibration. The flight time is also a disappointment with just 6 minutes at medium throttle. It&#;s more like 3 minutes on a single charge if you fly this puppy hard. Spare batteries are vital extras.



Tech Specs
Plane type: All-purpose RTF RC plane
Dimensions: x x ”
Material(s): Durable EPO
Flying Weight: oz.
Battery: mAh LiPo
Max flying time: 6 minutes
Charging time: 1 hour
The Pros
Easy to fly at beginner level
Lightweight foam construction
SAFE Plus GPS-enabled technology
Oversized Tundra tires
Optional flaps and floats
Brushless outrunner motor
DC charger + AC adapter
Spektrum DXe GHz Transmitter
The Cons
Missing indicators
Short flight time

4. VOLANTEXRC Micro RCTrainer Airplane

VOLANTEXRC Micro RCTrainer AirplaneView on Amazon

Editor’s Rating: /5

Meet the VOLANTEXRC RCl Micro Traninstar. It&#;s a small, lightweight, trainer that comes ready to fly (RTF) indoors or outside on calm days. It’s also the most affordable model on this page.

  • Best feature 1: Indoor/outdoor capable trainer plane
  • Best feature 2: Carbon frame
  • Plus points: 6-axis stabilizer, GHz controller, flexible EPP foam, simple charging
  • Minus points: Restricted 2 channel transmitter, not wind-resistant

What We Like About VOLANTEXRC’s Micro Trainer

The VOLANTEXRC Micro RC Trainer is an excellent choice for anyone who wants to have a go at flying. This model offers a lot considering its price. Best of all is that it’s indoor/outdoor capable. That&#;s thanks to the 6-axis stabilizer and GHz controller. Many budget-end RC planes use Infrared (IR) controllers instead of radio transmitters. The problem with IR is that it doesn&#;t work in bright sunlight.

This model has a carbon frame and uses flexible, crash-resistant EPP foam. The flight time of 15 minutes is also impressive for a small trainer. Charging is both convenient and quick using the transmitter. The only downside is that charging drains the controller batteries quicker.

The Not So Good

VOLANTEXRC’s mini RCTrainer uses a GHz controller which is great. The not so good is that it’s only 2 channels. That means there are just engine and rudder control. That’s a good thing for the complete novice of course. Still, the flying restrictions of a 2CH controller can soon become tedious. The other downside is that the model&#;s lightweight makes it too unstable to use outdoors in the wind.



Tech Specs
Plane type: Micro RTF RC Trainer
Dimensions: x ”
Material(s): Durable EPP
Flying Weight: oz.
Max Range: ft. (50 meters)
Battery: V 80mAh
Max flying time: 15 minutes
Charging time: 30+ minutes
The Pros
Indoor/outdoor trainer plane
Carbon framework
Flexible EPP foam
6-axis stabilizer
GHz controller
Simple charging
The Cons
Restricted 2 channel transmitter
Not wind-resistant

5. FunTech 3CH RTF RC Beginner Trainer Plane

FunTech 3CH RTF RC Beginner Trainer PlaneView on Amazon

Editor’s Rating: /5

This trainer plane is the FUNTECH 3 channel ready to fly (RTF) crash-resistant beginner craft. It’s a popular model with enthusiasts of all ages and an excellent first-time choice.

  • Best feature 1: Beginner-friendly RC Trainer
  • Best feature 2: 6-axis stabilizing gyro
  • Plus points: Durable EPP foam, 3 modes, variable speed control, extra props, fast charging
  • Minus points: Short flight time, only 3 channels

What We Like About FunTech’s RC Trainer

The plane uses durable, flexible expanded polypropylene (EPP) foam in its build. EPP is the perfect material for new pilots who can’t avoid a few crash landings. It has a rubbery feel to it but without the weight of rubber. The props are the most vulnerable in a crash, so this model includes an extra set. Accidents are quite uncommon, though, thanks to the FunTech’s novice-friendly features.

Beginner friendly characteristics include a 6-axis gyro and a variable speed knob. There are also 3 flight modes, i.e., Beginner, Intermediate, and Expert. The gyro doesn’t work in the Expert setting as skilled pilots need full control over flight behavior. Battery charging only takes around 20–25 minutes.

The Not So Good

Expect around 8 minutes of flight time on a full battery in Beginner mode. In Expert mode that goes down to about 6 minutes. The motors need at least 10 minutes to cool down between flights anyway. The fast charging time means there’s not the same urgency for spare batteries as with some planes. Most users still invest in extra packs to shorten the wait between flights.

This plane has only 3 channels (CH) despite its various skill levels. A 3CH model doesn’t have functional ailerons and is less agile than 4 or more channels. That’s not a problem for the novice, but it can become frustrating as skills develop.



Tech Specs
Plane type: RTF RC 3CH trainer
Dimensions: x x ”
Material(s): Durable EPP foam
Flying Weight: oz.
Max Range: ft. (98 meters)
Battery: V mah LiPo
Max flying time: 8 minutes
Charging time: 20+ minutes
The Pros
Beginner-friendly RC Trainer
6-axis stabilizing gyro
Durable material
3 flight modes
Variable speed control
Extra props
Fast charging time
The Cons
Short flight time
3 channels

6. HobbyZone Sport Cub S RTF W/ SAFE Select

HobbyZone Sport Cub S RTF W/ SAFE SelectView on Amazon

Editor’s Rating: /5

New pilots want to learn fast, but they also need a model that lets them set the pace. HobbyZone® Sport Cub S is a compact, lightweight plane that checks all the right boxes.

  • Best feature 1: SAFE® Select technology
  • Best feature 2: Award-winning RC plane
  • Plus points: 4CH (channel) control, panic recovery, steerable tail wheel, USB charging
  • Minus points: Average flight time, too small and light for winds

What We Like About HobbyZone’s Sport Cub S

Total newbies can practice flying this beautiful bird using the RealFlight® simulator. Those who want to take to the real-world sky right away can do that too. The revolutionary SAFE® Select technology gives any raw novice confidence on those early flights. It’s easy to advance one’s flying skills using the various modes too. And the Panic Recovery button is always at the fingertips if you need it.

Many trainer RC planes are 2 and 3 channels (CH), but this one is a 4CH. Four channels give pilots more controls. That includes ailerons as well as a working throttle, elevator, and rudder. Ground control is made easy with the steerable tail wheel. The Sport Cub S uses a v 1S mAh LiPo battery that charges in an incredible 20 minutes using the USB port.

The Not So Good

Moderate flying should get about 9 minutes on a single charge or slightly more. That’s average yet annoying, especially for learner pilots not used to short flights. At least you only need one extra battery with the super-fast charging time. HobbyZone says this plane is steady in winds—it’s not. It’s too small and light to fly well outdoors in anything above 5 mph.



Tech Specs
Plane type: RTF Sport Cub S Trainer
Dimensions: x x ”
Material(s): Foam
Flying Weight: oz.
Max Range: ft. (91 meters)
Battery: v 1S mAh LiPo
Max flying time: 9 minutes
Charging time: 20+ minutes
The Pros
SAFE® Select technology
Award-winning RC plane
Striking replica of the Sport Cub
4CH (channel) control
Panic Recovery mode
Steerable tail wheel
Fast USB charging
Works with RealFlight® simulator (not included)
The Cons
Average flight time
Too small and light for winds

7. ParkZone F4F Wildcat BNF Basic W/ AS3X

ParkZone F4F Wildcat BNF Basic W/ AS3XView on Amazon

Editor’s Rating: /5

This RC warbird is the ParkZone F4F Wildcat. You may recognize it as the airplane that took to the skies over Pearl Harbor through It’s a beautiful scale replica and a competent RC trainer.

  • Best feature 1: Optional SAFE® Select flight protection
  • Best feature 2: Powerful size brushless outrunner motor
  • Plus points: Quick assembly, easy to fly, durable EPO, hand launch, wide battery range
  • Minus points: Bind-N-Fly (BNF) also a pro, short flight time

What We Like About ParkZone’s F4F Wildcat

Park flyers like this F4F Wildcat make brilliant trainer planes. This model needs some assembly, but it’s straightforward and doesn&#;t take more than a few minutes. The plane comes equipped with plenty of pilot-friendly features. There’s a Spektrum receiver integrated with Artificial 3-axis Stabilization (AS3X) technology. AS3X maintains smooth steady flights when there&#;s a little wind turbulence.

The SAFE Select features add to the RC plane’s trainer capabilities. They include pitch and bank angle limits, automatic self-leveling, and more. Crashes are uncommon in training modes, though. And the durable construction and tough EPO foam protect the model if you do land heavy. The ParkZone’s F4F Wildcat is so easy to fly at any level, but it’s not only appealing to new pilots.

Bind-N-Fly (BNF)

Hand launches are fun. The plane quickly soars thanks to its Powerful size brushless power system. It’s a bind-n-fly model, though, and doesn’t come with a controller, battery, or charger. The good news is that you get to choose from a wide battery range, i.e., –mAh 3S LiPo.

Items needed to complete the kit include:

  • Full-range, 5CH+ DSMX®/DSM2®
  • Flight battery –mAh 3S LiPo w/ EC3™ connector
  • Compatible LiPo charger

The Not So Good

Novice pilots—especially raw beginners—want to start flying with minimal fuss. Bind-N-Fly (BNF) means you must shop for other parts, so it’s a downside for some folks. But BNF planes are great investments if you have two or more BNF models. That’s because you can use one quality transmitter with several aircraft. That not only saves money in the long term but space too.

BNF can be a pro or a con depending on needs and expectations. The other gripe is the short flight time that comes with these birds. This model averages around 7 minutes with the biggest battery.



Tech Specs
Plane type: Parkflyer RC Warbird
Dimensions: 33 x x 8
Material(s): Durable EPO material
Flying Weight: oz.
Max Range: Depends on transmitter
Battery: –mAh 3S LiPo (not included)
Max flying time: 7 minutes
Charging time: Depends on charger
The Pros
SAFE® Select flight protection
Powerful brushless motor
Quick assembly time
Fun and easy to fly
Durable construction
Hand launch
Wide battery range
BNF Bind-N-Fly (also a con)
The Cons
BNF Bind-N-Fly (also a pro)
Short flight time

8. EFL Valiant M BNF Basic Trainer Plane

EFL Valiant M BNF Basic Trainer PlaneView on Amazon

Editor’s Rating: /5

Last on the list of capable RC trainer planes is the versatile Bind-N-Fly (BNF) Valiant™. It&#;s a M park flier with the familiar stability of a high-wing model. This aircraft also has a sporty air about it.

  • Best feature 1: AS3X Receiver with Optional SAFE Select Technology
  • Best feature 2: Stable M RC trainer plane
  • Plus points: Functional flaps, brushless power, aluminum landing gear, float set ready
  • Minus points: Bind-N-Fly, float set not included

What We Like About EFL’s Valiant Trainer

The Valiant’s striking design adds to the fun of the flight. This BNF basic trainer is versatile and exciting for pilots of all levels. Learners can exploit the AS3X Receiver with Optional SAFE Select Technology. AS3X (Artificial Stabilization, 3-aXis) ensures smooth, stable flying. The optional SAFE Select features support the learning experience. It provides pitch & bank angle limits, self-leveling, and more.

Another welcome feature is the functional flaps that allow pilots to unleash the beast. Once they have developed a few skills, it’s time to increase the performance envelope. Aerial aerobatics are possible thanks to the brushless motor, light wing loading, and working flaps. And if you want fun on the water, you’ve got that too. It only takes a few moments to install a float set to the Valiant.

Finally, there’s the aluminum landing gear with wheel pants. It’s worth mention because flimsy landing equipment often lets RC planes down. There’s no risk of that with the Valiant™ park flier.

Items needed to complete the kit include:

  • Full-range, 5CH+ DSMX®/DSM2® transmitter
  • Flight battery –mAh 3S LiPo
  • Compatible 3S LiPo charger

The Not So Good

Pilots looking for training planes don’t usually have a collection of models. Bind-N-Fly is only an advantage if you own—or expect to own—several BNF aircraft. That’s because you can use one transmitter to fly them all. Choose a ready to fly (RTF) RC plane if not. The versatile Valiant™ is float-set ready, but you must buy them as separate items. The price of the float set is around $30 or less.



Tech Specs
Plane type: BNF RC Park Flyer Trainer
Dimensions: 39 x x ”
Material(s): durable Z-Foam™
Flying Weight: 40 oz.
Max Range: Depends on transmitter
Battery: mAh 3S LiPo (not included)
Max flying time: Depends on battery
Charging time: Depends on charger
The Pros
Stable M RC trainer plane
Bind-N-Fly RC Trainer
AS3X Receiver
Optional SAFE Select Technology
Fully-functional flaps
brushless motor
Float set available
Sturdy aluminum landing gear
The Cons
Bind-N-Fly (also a pro)
Float set not included



The driver of the director of the boarding house, Uncle Seryozha, was standing in the washroom. Great, you could say an athletic middle-aged man. She coquettishly put her foot to the side, then purred something. Over the sound of the water, you could not hear that.

Airplane trainer best rc

Twenty. - She was 23. But I love everyone, the drunken MM muttered. - But we wanted to respect you.

BEST RC Plane Under $200 of 2020 - Arrows Bigfoot 1300mm Lights \u0026 Flaps - TheRcSaylors

You guess my thoughts, even being at such a terrible distance from me. So what do I owe your attention to. - I have one surprise for you.

You will also like:

Andrei rarely pampered his taxi friend with affection and yielded only if she really asked. The girl literally melted from the caresses of an experienced woman. She even dared to press her mistress's head with her hands to a secret place. For almost a month, women were given lesbian love every night. Since then, Natasha has felt aroused in the pool locker room and even in the university toilet.

1073 1074 1075 1076 1077